If you are a proud owner of the Husqvarna 562xp, you must know how professional this chainsaw is in performance. But, like all machines, this chainsaw, too, has several issues in the mechanical realm or real-life scenarios. That is why many people ask for solutions for several Husqvarna 562xp problems.
And this is why we’re here. In this particular discussion, we will walk you through a complete solution guide to the most common issues that you might face when using the Husqvarna 562xp.
Major Husqvarna 562xp problems With Solutions
First, let’s have a sneak peek at the major problems and probable reasons.
|Hot start problems
|Using for too long
|Keeping the choke on while chainsawing
|Husqvarna 562xp oil pump problems
|Husqvarna 562xp piston problems
|If not changing machine oil
1. Husqvarna 562xp Hot Start Problems
Your Husqvarna 562xp won’t start if it’s too hot or kept in the sun for too long. It’s one of the most commonHusqvarna 562xp starting problems. Since it’s a gas-powered machine, it has an actual ambient temperature that will perform the best.
Also, it has a range of temperatures, in which it won’t operate as you want it to. Most probably, your Husqvarna 562xp won’t start at any temperature above 86°F.
The only solution we can suggest in this case is to let the chainsaw sit for about 15 minutes, which will give it time to cool down. At this time, please do not keep it in direct sun.
The Husqvarna 562xp flooding problem is a common issue many new users face. When you turn ON the choke on the chainsaw, and at the same time, attempt to start the machine, the fuel will flood the engine. As a result, your chainsaw will get flooded, and it won’t start.
So, What Is the Solution?
The solution to this problem is pretty simple. You’ll find a red tab in your Husqvarna 562xp. It’s the choking lever (you can turn ON/OFF the choke with it).
So, if you want to start your flooded Husqvarna 562xp, you’ll have to turn the choke lever OFF and let the chains rest for 10 minutes.
After that, keeping the choke OFF, you’ll have to turn the primer ON. And then, you’ll have to attempt to start the machine. Hopefully, you’ll be able to start it this time successfully.
After many hours of consistent cutting performance, many people face oiling problems in the Husqvarna 562xp chainsaw. This issue usually occurs when you use the chainsaw for 4 to 5 hours every day without changing the machine oil in it.
Now, let’s see how we can very easily solve this problem.
The first solution to this issue is to change the machine oil on your chainsaw. After that, you’ll have to take the necessary steps to clean the chainsaw and remove any existing excess dirt or filth from the machines’ mechanical parts.
Furthermore, another thing you could do is open the gasoline reservoir and keep the chainsaw upside down for a few minutes. This will let gravity pull out all that old gasoline from the chainsaw. Then, you can put new clean gasoline inside that gasoline reservoir and shake the chainsaw to make the new oil reach into all the necessary places inside the chainsaw.
After that, steadily start the machine (Not at full speed). And after letting it run for 20 to 30 minutes at low speed, you can start using it at full throttle.
Not changing the machine oil regularly can also damage your Husqvarna 562xp pistons. In that case, you’ll have to follow the below solution to solve your issue.
To make your chainsaw fully capable of running at its former speed, you may have to change your damaged cylinder and piston. In that case, we recommend changing the cylinder and piston of your Husqvarna 562xp.
Furthermore, we endorse this cylinder kit for your Husqvarna 562xp. Remember, changing the cylinder and piston of your chainsaw will also solve the Husqvarna 562xp autotune problems that you may have been facing. So, go ahead and change the cylinder and piston of your chainsaw and make it perform anew.
Frequently Asked Questions (FAQs)
Is the Husqvarna 572xp AutoTune?
Yes, both the Husqvarna 562XP and 572XP have autotune feature. This particular feature facilitates a chainsaw to optimize performance without jittering and stuttering.
How many cc is a Husqvarna 562XP?
The engine capacity of the Husqvarna 562 XP is 59.8 cc. Furthermore, this engine has a total power of 4.6 HP. Also, it can reach a maximum speed of 9600 RPM. Compared to any other type of chainsaw in the market, this engine is a very vibrantly powerful one. So, you shouldn’t have any problem chainsawing for extended hours with this particular engine.
How do you warm up a Husqvarna chainsaw?
To warm up your Husqvarna chainsaw, first, you have to disengage to change your brake and pull the choke all the way up. After that, you’ll have to push the air purge button 5 to 6 times. Then, you can hold the chainsaw in the ground and pull the starting rope 5 to 6 times to make the chainsaw warm (it’ll probably start at this point).
Many Husqvarna 562xp problems occur due to poor maintenance of the machine. Although you can easily solve many of these problems using quick hacks and solutions, you may need to change major engine parts. This is because of not properly maintaining the chainsaw.
That’s why we recommend that you clean up the chainsaw weekly and change the machine oil on a routine basis. If you keep up the routine maintenance process, we are confident that you won’t face the problem we have mentioned above. But, unfortunately, even if you face such problems, you’ve got nothing to worry about because we’ve covered all the solutions in this very discussion. Best of luck !!
You Can Also Read:
- Husqvarna 150BT Problems You Could Never Think Of: Researched and Explained
- Husqvarna 525L Vs 525LS: Silent Clash for Louder Trimming Results!
- [Detailed View] Husqvarna 125b Fuel Line Diagram & Major Explanation
Enamored with the world of golf Jack pursued a degree in Golf Course Management at THE Ohio State University. This career path allowed him to work on some of the highest profile golf courses in the country! Due to the pandemic, Jack began Inside The Yard as a side hustle that quickly became his main hustle. Since starting the company, Jack has relocated to a homestead in Central Arkansas where he and his wife raise cattle and two little girls.