How to Adjust Steering on Bad Boy Zero Turn Mower to Master the Ride

by Jack Grover
Reading time: 8 min Prefer to listen?
How to Adjust Steering on Bad Boy Zero Turn Mower

Are you thinking it would help if you knew how to adjust the steering on Bad Boy zero-turn mower? To ride with your comfort level, you can adjust the steering arm by removing the 2 bolts securing the position.

However, let’s disclose all the facts regarding the adjustment of the Bad Boy ZTR mower and help you master the steering lever.

How To Adjust Steering On Bad Boy Zero Turn Mower

If you don’t have any clue on the steering of Bad Boy zero turn mower you can also follow the below steps to adjust the steering arm or steering lever whatever you say.

Now, before proceeding. Fix the steering wheel and pedals to proper positions.

  • Next, practice on the steering arm to adjust the speed according to your need. You see, practising the steering levers can help you get a better grip on the sluggish steering.
  • To fine-tune the steering, you must first loosen the two arms and then line them up perfectly.

If this is your first time modifying the Bad Boy mower steering adjustment, follow the steps below.

  • Heighten the Steering Column Lever
  • Unbolt the upper control arm bolts holding the piston and handlebar bolts holding the pump.
  • Now, align the mounting holes with the selected adjustable holes by moving the handlebar up and down.
  • However, you can also adjust the breadth of the steering-lever knob.
  • Start by loosening the hardware at the bottom of the lower control arm.
  • Loosen the hex bolt nut holding the eccentric spacer and remove the eccentric spacer.
  • Both arms should have the same amount of space, so spin the spacer to make that adjustment.
  • Tighten all of the components.

Now, How to Adjust the Steering Lever (Forward or Backward)

  • The steering control can be removed by loosening the fasteners on the upper control arm.
  • Set your preference for forwarding/reverse rotation by adjusting the steering lever.
  • Start with the uppermost bolt and tighten it down.

If you find your handlebars are locked, and the mower is still moving forward or backward, it’s known as creeping, and we’ll now demonstrate how to fix it with a 9/16-inch wrench.

You Can do this in Your Garage

  • First, locate the pushrods that connect the handlebars to the transmissions
  • Next, undo the 9/16-inch jam nut on the underside of the Heim’s joint and pull down on the spring-loaded Heim joint to remove it from the frame.
  • Now, the Heim joint can be rotated in or out to change the overall length of the pushrods.
  • If the mower creeps forward, you will want to shorten the rod’s overall length just a little bit, normally one round of the Heim’s joint will suffice.

You Can Also Make the Bad Boy Mower Speed Adjustment As Follows

  • You can reduce the steering lever travel by turning the adjustment bolt counterclockwise.
  • You can increase the steering lever travel by counterclockwise turning the adjustment bolt.
  • Then, reinstate the nut and squeeze it all the way.

When you push both Bad Boy mower steering arm adjustment levers forward, your mower should stop rotating to the right or left if you did everything correctly.

You May Like This Video Too

Frequently Asked Questions (FAQs)

What does a steering damper do on a zero-turn mower?

The dampers eliminate hydraulic-system feedback from the levers, reducing fatigue for the operator. In tight, precise maneuvers around obstacles, they don’t have a u0022jerkyu0022 feel to them.

Why does my zero turn pull to the right

Using a zero-turn mower can lead to traction issues, where one of the rear wheels transfers power more efficiently than the other, causing the mower to push in the direction of the weaker wheel.

How do you adjust the steering on a zero-turn mower?

Decide which way your lawnmower pivots (left/right) before purchasing.u003cbru003eRemove the adjustment bolt and loosen the nut on the adjustment bolt.u003cbru003eChoose between two options for adjusting the speed: The steering lever travel will be reduced if you turn the adjustment bolt counterclockwise. Tighten the nut down once more.


At last, we hope you know and understand how to adjust steering on Bad Boy zero turn mower that we have provided in the article.

That ends our overview of bad boy zero turn mower steering adjustments.

Naturally, the design of certain models varies, so the directions may differ slightly. But the basics are the same.

Having said that, if nothing works, take your bad boy zero turn mowers to a dealer for a check and repair by professionals.

You Can Also Read:

Was it helpful?

Thanks for your feedback!

You may also like

Leave a Comment

About Us

Inside The Yard is your go-to source for all things lawn and garden, offering expert advice for every corner of your outdoor space, from tractor troubleshooting to the best rose-planting tips, all wrapped up in the nation’s fastest-growing garden blog.

Latest Articles